Click here to view the recording

Process Flowsheet Optimization in Theory and Practice

The optimisation of process flowsheets is one of the major tasks of chemical engineers when designing new or optimizing existing flowsheets with respect to CO2 emission, energy consumption and/or investment costs. Most of the commercial process flowsheet simulators offer optimisation capabilities, but they are not widely used. Instead, "glorified case study approaches" (Lorenz T. Biegler, Current Opinion in Chemical Engineering 2018, 21:32-40) are used for good reasons. The aim of this talk is to demystify the mathematical optimisation methods by providing the necessary mathematical background using industrial case studies.

The first part of this talk will show why well-known mathematical optimisation methods like sequential quadratic programming (SQP) fail and which countermeasures can be taken. This will be demonstrated by using a real-world case study of an industrial separation process.

The second part of the talk will focus on optimisation methods with discrete decision variables. Discrete optimisation methods play an important role in many real-world applications in chemical engineering like superstructure optimisation and scheduling. These techniques present additional challenges compared to continuous flowsheet optimisation. In particular, the talk will focus on the non-convexity problem and how this problem can be overcome using decomposition approaches. The talk closes with an evaluation of existing optimisation methods and a recommendation for future research from the author's point of view.

About the speaker

Meik Franke is Professor for Process Design and Optimization at the Sustainable Process Technology Group at the Faculty of Science and Technology of the University of Twente. His research interests are in the area of process design and optimisation including mixed-integer optimisation, process optimisation under uncertainties, and scheduling of chemical batch plants.

He studied Chemical Engineering at the Technical University of Dortmund in Germany and obtained his PhD at the Laboratory of Fluid Separations of Professor Andrzej Górak at the same university. He worked for over 15 years at Bayer and LANXESS in Germany and China in various positions in R&D, production, and project engineering. In his last assignment at Bayer, he was heading the Process Modelling and Design group, which is part of the digital transformation activities providing the Digital Twins for the productions plants of Bayer.